The Explanation of ST Series Solenoid Valve
The ST Series Solenoid Valve is a pneumatic valve controlled by micro eletric singal, with small dimension, large folw, handsome shape, reliable performance and long service life. It can be installed in integration. It is an ideal directional control element, applicable to the electromechanical integration. There are multiple specification for your choice.

The Same specification of ST Series Solenoid Valve
1)Position and way No.: 3/2 Way or 5/2 Way or 5/3 Way
2)Working Medium: 40 Micron Filtered Air
3)Operating Temperature Range: -5~50 º C
4)Motion Pattern: Internally Piloted
5)Working-pressure: 0.15~0.8MPa
6)Highest Motion Frequency: 5 Cycles/sec
7)Lubrication: Needless

The Coil of ST Series Solenoid Valve
1)Electrical Entry: Lead Wire or DIN Terminal
2)Allowable Voltage Range: ± 10%
3)Insulation & Protection Class: Class B or Equivalent
4)Excitation Time: 0.05Sec
5)Power Consumption:
AC: Start: 5.6VA, Keep on: 5.4VA
DC: 4W
6)Surge Voltage Suppressor:
AC: Varistor
DC: Diode
7)Indictor Light: Neon Light, LED

The Maintenance Notice of ST Series Solenoid Valve
1. Be sure to check up the valves before handing.
2. Before installation, please confirm the voltage is up to the mustard, and connection and direction of the air flow are right.
3. Notice to be dustproof. It's best to install a sliencer speed control sliencer in front of solenoid valve.
4. Metal grain, dust and oil stain in pipes and fittings must be washed neat before connected.